esparagus is an ESP32-family flasher written in Rust — a behavioral port of esptool’s protocol, sync, reset, and stub-loader paths, wrapped in an observability layer built for programs rather than humans: NDJSON events, a machine-readable report file, stable exit codes, and an expect-style serial monitor with built-in crash detection. This article explains why that layer exists, how the flash-test-fix feedback loop works, and the three ways to integrate it — direct CLI, an Agent Skill, and an MCP server.
AES67/RAVENNA is the audio transport behind a lot of broadcast and live-sound infrastructure, and it normally runs on dedicated silicon or Linux boxes. This article is about getting a working, PTP-synchronized AES67 endpoint onto an ESP32-P4 — how the clock sync, the low-latency receive path, and the I2S playout fit together, what the measured latency is, and where the edges are.
A set of ESP-IDF components that run the Rust smoltcp stack as the IPv4/IPv6 data plane, while keeping esp_http_server, esp-tls and esp-mqtt working without source changes. This article explains the linker –wrap shim that makes it compatible, the single-task poll architecture, the throughput I measured on an ESP32-P4 (91.15 Mbit/s on a 100 Mbit link), and the limitations to be aware of.
